Flat roof maintenance is important part of healthy building operations. Ideally, roofing systems should be inspected twice a year, in the autumn and in the spring. During the roof inspection you should look for the following 5 scenarios to keep your roof at its best and avoid big roof repairs before hand.
Snow Build Up. Snow should not be ignored on your roofing system. Since your roof is flat, the snow won’t be able to slide off your system as easily as it would on a sloped roof building. Excess snow can overload the roofing system and cause roof collapses. On the other hand, if the snow melts and the roof is not draining properly, you’ll run into a ponding water scenario. Be sure to hire someone to remove the snow if you are worried about your roof, especially if the snow exceeds a foot. Every year serious injuries occur due to inexperienced owners who are trying to do DIY snow removal.
Ponding Water. Ponding water is defined as accumulative water that does not evaporate or disappear within 48 hours of conducive drying conditions. If ponding water is not taken care of, roofing systems can experience membrane degradation resulting from exposure to magnified UV rays, the presence of algae, or accelerated heat aging. If your roofing is experiencing ponding water, be sure to contact your contractor or manufacturer in order to resolve the problem.
Blistering. When examining your roofing system, be sure to look for the blistering of the materials. Typically, your roof will look like it has sections of raised strips on top of the surface. Blisters that are neglected can pose a serious threat to the integrity of your flat roofing system. This is because liquid is trapped between sections of membrane and then, as it becomes vapor, expands and augments your roof. By taking care of any blisters as soon as you notice them, you can prevent water from continuing to seep into your roofing system, preventing further degradation.
Cracking. There are a variety of factors that can cause cracking in your roofing system. Some roofing systems are more susceptible to damage caused by UV rays; the UV breaks down the membrane and causes cracking and crazing. In other scenarios, poor workmanship could be to blame. Surface stress caused from excessive weight on your roofing system is another common cause of cracking. Regardless, this cracking could lead to more serious problems down the line and should be addressed immediately when found.
Loose Fasteners. Loose fasteners can spell disaster for flat roofing systems. When fasteners become loose they no longer anchor the roofing system to your building as intended, causing your roof to be more susceptible to wind damage and potential tear-off. Installation instructions specify the type of fasteners that need to be used on your roofing system. If your contractor uses the wrong ones, your warranty could be voided.
Overall, maintenance routines need to be set in place immediately following the finished construction of your roofing system. Don’t forget to ask your inspector vital questions during your bi-yearly inspections to ensure you are protecting your roofing system, and building, from danger.