Choosing The Right Roof Ladder

A good ladder can give you easy access to heights and support you as you work on awkward roof slopes. The different variations of ladders available to choose from, plus the supporting accessories available, can make a world of difference between a long, laborious installation and a quick, efficient one.

With that in mind, read our tips below. Choose wisely by thinking about the houses and sites you work on and what obstacles a good ladder might help you overcome. There are a ton of neat – and helpful – features out there and some innovative add-ons that will make it seem like the world of ladders has been personalized just for you.

All about roofing ladders

Ladders come in all different shapes and sizes and feature many different characteristics to make your job safer and easier.

So, before you begin your hunt, think about what you’ll use your ladder for, or what different combinations of ladders you may need to complete a job. Consider your daily tasks on the job site – do you need access to the roof, a means to scale the roof itself, or an elevated ladder beside the home that can double as a mini work station?

For instance, to install shingles, you will likely need a stepladder or extension ladder to get to the roof and then a roofing ladder affixed to the roof to complete the work. Be sure to always tie off your ladder using an anchor (or other stabilizer) to ensure it doesn’t slide sideways as you get onto the roof.

Ladder Style

Fixed
Fixed ladders are installed as a permanent or long-term fixture of a building or facility. Residential roofers for the most part won’t come across this style often in their work, because they are most often seen in commercial applications, when access to a roof is required year-round.

Mobile Self-Supporting
These are ladders that stand on their own, known as stepladders or A-Frame ladders. These come in a range of sizes and load rating – from your typical household ladder to more professional grade styles, which can handle heavier weights.

Non Self-Supporting
As the name suggests, a non self-supporting ladder is usually called a straight ladder or extension ladder and must lean up against something (i.e. a building) to be secure.

Residential roofers will most often use a combination of different ladders to install shingles or complete other roofing tasks. Roofers will usually use an extension ladder to gain access to the roof and a second extension ladder with wheels and hooks (to secure it to the ridge of the roof), to complete the work from the roof.

Roofing ladder
A roofing ladder is simply an extension ladder that has been securely attached to the ridge of a sloped roof to allow a roofer to work from an angle (though, no more than 75 degrees) on the roof.

To secure the extending roof ladder, a pair of roof hooks should be installed onto the ladder. These are often accompanied by rolling wheels that allow you to push the ladder up the height of the roof.

Never rest your ladder on the eavestrough or gutter of a roof as a sole means of support – this will not be able to hold the weight of workers and/or materials.

Though technically not a ladder, there is also a roof support system called a “crawl board” or “chicken ladder” that comprises a board that’s hooked onto the roof ridge with smaller boards nailed to it that act as foot holds, called cleats.

Ladder Size (Length)

Ladders come in lengths that can vary anywhere from two to 40 feet. To get maximum length, you may need an extension ladder with multiple layers, which will usually offer either a roll or pulley system to allow the full length of the ladder to be let out.

How to calculate the length you need
Wondering what size of ladder to get on the roof? When considering how tall a ladder needs to be to reach a roof, don’t forget that useable height of a ladder is different than its actual height. Keep this in mind when calculating the minimum height the ladder must be to reach the roof.

For instance, on an extension ladder, you can only use up to the top three feet. If you step higher than this, the ladder may become unbalanced and risk tipping.

Meanwhile, on a step ladder, you can only use up to the second to last step (top two feet) safely – any more than that and the ladder will become unstable.

This extra space also gives you something to hold on to when getting off the ladder, and can also be used to store materials if your ladder has a platform or utility rung.

Extension ladder length

When choosing an extension ladder length, be sure to factor in the angle at which it will lean. When you’re leaning it against a building or wall, OSHA requires the base to be set back from the building one foot for every four feet of height to ensure stability. If you overshoot the height, the feet may slip out. If you undershoot, may have to climb higher than is allowed and lose your balance.

So, for instance, if you have a 60 foot ladder, it will end up reaching only 58 feet because of the angle.

Ladder Duty Rating

Pay careful attention to the duty rating of a ladder before you make your purchase. This is the maximum weight of person and materials – or “live load” – a ladder is rated for. When using a ladder, never forget to calculate the weight of materials you are carrying and add that to your own body weight – heavy roofing materials such as shingles can add up quickly, and may bring you close to the maximum load your ladder can handle.

The Canadian Standards Association (CSA) divides ladders into three categories: Domestic (up to 200 lbs), Professional (up to 225 pounds) and Industrial (up to 250 pounds). See “load capacity” section here.

Remember, there is no relationship between the height of the ladder and how much weight it can handle.

Ladder Materials

There are a handful of different materials available when choosing a ladder for roof work. Like with style and weight, consider what you will use your ladder for to find the right choice for your work.

Aluminum is lightweight, popular and highly weatherproof. An aluminum roof ladder is generally seen as a versatile, long-lasting and can stand a lot of wear and tear – although it may be a little more prone to dings or scratches than heavier metal. Aluminum ladders are considered average in the ladder material price range.

Steel (or stainless steel) is another highly durable material, but needs to be rust-proofed first to protect it from the elements. It is also the heaviest of the materials listed, so may not be suitable for all roofing applications. This is a costlier material. You may often see this type of ladder in fixed, commercial applications. Chicken ladders (as mentioned above) are also often made of steel.

Wood ladders are usually pressure treated and varnished to make them weatherproof and are often crafted from beech wood, ash or plywood laminated and glued in layers. Side rails and rungs are glued on and screwed on.

Some say wood ladders have a shorter lifespan than their aluminum counterparts and are damaged more easily. Wood is also considered a more affordable option. When dry, wood is non-conductive, so if you are working near electrical materials, this may be a good choice. However, it becomes conductive when wet.

On that note, remember that ladders should always be kept at least 10 feet away from live electrical lines. If you’re working around electrical hazards or wires, consider using a fiberglass ladder – this is also a non-conductive material that promotes safety.

Fiberglass can be a pricier option. Fiberglass ladders are typically heavier than their aluminum counterparts and less prone to damage. Often, you’ll find an aluminum ladder with reinforced fiberglass side rails, which is another popular choice.

Hooks and stabilizers

To secure your ladder to the ridge of your roof, you’ll need a pair of roof ladder hooks. This is a crucial type of ladder stabilizer for roof work. The hooks should be padded or made of a material that won’t damage the roofing shingles.

Experts recommend that when choosing a ladder to work on a steep pitch roof, you should install a roof ladder hook kit that’s made by the same manufacturer as the ladder itself for material consistency and a tight fit. You’ll also need wheels for your on-roof ladder, to allow it to be slid to the ridge of the roof without damaging shingles or other roofing materials. These wheels are often included alongside your roof hooks if you purchase a universal roof hook kit.

There is an abundance of other roof ladder stabilizer accessories. For example, you may consider rubber anti-slip safety mats on which to rest the feet of the ladder. These are helpful if the surface you’re working on doesn’t allow you to embed the ladder feet into the ground (like you can when resting the ladder on grass or soil) or screwing it into a deck.